Lighting & Controls
High Mast Lighting Contractor in Colorado
Installation, lowering-device repair, LED conversion and photometric aiming for high mast poles on roadways, airfields, yards and terminals across Colorado.
High mast lighting is its own trade inside the electrical trade. The poles run 80 to 150 feet, a single ring can carry thousands of pounds of fixtures, and every one of them is aimed to a photometric plan. Most electrical contractors sub it out. EVO self-performs it, from the foundation to the final aiming readings, and Musco Lighting has contracted EVO directly to install its high mast systems on airfield apron work.
High mast work we do
- New high mast pole erection, foundations, anchor bolts and grounding
- Raising and lowering device installation, repair and replacement: winches, cables, latching heads and drive units
- LED retrofit of high-pressure sodium and metal halide high mast rings
- Aiming, photometric verification and re-commissioning after a retrofit
- Feeder, conduit, pole wiring and lightning protection repair
- Emergency repair after knockdowns, storm damage and failed lowering systems, 24/7
- Scheduled maintenance programmes for owners with many poles
Where high mast lighting is used
Anywhere a large area has to be lit evenly from a few tall points: highway interchanges and corridors, airfield aprons and ramps, rail yards, ports and intermodal terminals, truck stops, distribution yards, large parking fields and industrial sites. On state roadway work we build to the project specification, commonly CDOT's high mast lighting standard detail, and to NECA 505, the installation and maintenance standard for high mast, roadway and area lighting.
Lowering devices: the part that fails
A high mast pole is only as serviceable as its lowering system. Seized winches, frayed cables and latching heads that won't release are the most common reasons a ring of fixtures stays dark for months. We inspect, repair and replace lowering devices, and where a device can't be made safe, we bring lift equipment with the reach and ground capacity to do the work from the air.
LED conversion done right
High mast is where LED pays back fastest. Every relamp on a 120-foot pole costs a lift or a lowering cycle, so longer life is worth as much as the energy saving. The conversion has to be designed, though. LED optics don't throw light the way the old HID lamps did, and reusing the old aiming angles is the most common reason a conversion ends up worse than what it replaced. We work from verified photometrics for the new fixture, confirm the ring, the pole and the lowering device can carry it, and take field readings after aiming.
Working around live operations
Interchanges, airfields and yards rarely close for lighting work. We plan lane closures and traffic control, escorted airfield access and movement-area windows, and yard shutdowns around the operation, not the other way round.
For sports facilities, see stadium and sports field lighting. For the full picture of our tall-pole work, see high mast and sports lighting.
Common questions
How tall is a high mast lighting pole?
Most high mast poles are 80 to 150 feet tall. Highway agencies usually treat mounting heights of 100 feet and up as high mast, and anything shorter as conventional pole lighting.
Can you repair a high mast lowering device?
Yes. We repair and replace winches, cables, latching heads and portable drive units. If a lowering system can't be made safe, we service the ring from a lift instead.
Is it worth converting high mast lighting to LED?
Usually, yes. The energy saving is real, but the bigger saving is maintenance, because every relamp on a tall pole needs a lift or a lowering cycle. The fixture has to be chosen and aimed from verified photometrics, or the light on the ground can get worse.
Do you work on CDOT and airport high mast projects?
Yes. We build to the project specification, commonly CDOT's high mast standard detail on state roadway work, and we work airfields with escorted access and movement-area authorization.
Do you handle emergency high mast repairs?
Yes. We're open 24/7 for knockdowns, storm damage, failed lowering devices and circuits that have gone dark.
Ready to talk about your project?
Tell us what you need and we will give you a straight answer on scope, schedule and cost. No obligation, and no pressure if it turns out we are not the right fit.